Search By Model | Search By Engine | Search By Part No | Interchanges | New Items | Home
GENERAL MOTORS PRODUCTS 13
<< First Panel < Previous Panel Next Panel > Last Panel >>
Engine Years CC Bore X Stroke Cyl Models
111 Isuzu SOHC 8 valve 1972-82 1817 cc 84.00X 82.00 4 cyl Luv
119 Isuzu SOHC 8 valve 1982-85 1949 cc 87.00X 82.00 4 cyl S10, S15

King Set No
Part No
Qty
Position
Crankshaft
Diameter
Housing
Diameter
Bearing
Length
Max Wall Thickness
CR4141AM
STD/.25/.5/.75/1.0/1.25/1.5
superseded by CR4141SI
All 8 halves with partial groove and two oil holes: - 3 mm hole at 20 degrees from the center line; - 4 mm hole at 41 degrees from the center line.
ACL:4B2821 CLE:CB-1597P(4) DAI:R 522A FMO:4-3570CPB GLA:B4787SA NDC:CB-1628GP OEM:8-94101-041-0 VAN:VPR92720A
C4141
4 Pairs

1.9262/ 1.9268
48.925/ 48.941
2.0466/ 2.0472
51.984/ 51.999
0.8710
22.12
0.0596
1.514
CS 329BB
Balance shaft bearing.
ACL:3C1190S CLE:SH-1190S DUR:CHG-14 FMO:1444M

MB 540AM
STD/.25/.5/.75/1.0/1.25/1.5
ACL:5M2817 CLE:MS-1298AL DAI:M5014K FMO:5028M GLA:M5270SA NDC:MS-1103GP OEM:8-94215-641-0 VAN:VPM91677
M 540/1

M 540/2
3 Pairs

2 Pairs
1-3-5

2-4

2.2016/ 2.2022
55.921/ 55.936

2.2016/ 2.2022
55.921/ 55.936
2.3220/ 2.3228
58.979/ 58.999

2.3220/ 2.3228
58.979/ 58.999
1.2650
32.13

0.8310
21.11
0.0596
1.514

0.0596
1.514
TW 118AM
STD
ACL:1T3286/1T1824 CLE:TW- 451S DAI:T 500A FMO:3571BF GLA:W2188SA K.S:TW-1616A NDC:TW-1030GP OEM:8-94210-750-1 VAN:VPW95068
W 118
1 Pair

2.5098/ 2.5197
63.749/ 64.000
3.1575/ 3.1673
80.201/ 80.449
0.0000
0.00
0.0929
2.360

	GENERAL MOTORS PRODUCTS				13
	<< First Panel	< Previous Panel	Next Panel >	Last Panel >>

Engine	Years	CC	Bore X Stroke	Cyl	Models
111 Isuzu SOHC 8 valve	1972-82	1817 cc	84.00X 82.00	4 cyl	Luv
119 Isuzu SOHC 8 valve	1982-85	1949 cc	87.00X 82.00	4 cyl	S10, S15

King Set No	Part No	Qty	Position	Crankshaft Diameter	Housing Diameter	Bearing Length	Max Wall Thickness
CR4141AM STD/.25/.5/.75/1.0/1.25/1.5 superseded by CR4141SI All 8 halves with partial groove and two oil holes: - 3 mm hole at 20 degrees from the center line; - 4 mm hole at 41 degrees from the center line. ACL:4B2821 CLE:CB-1597P(4) DAI:R 522A FMO:4-3570CPB GLA:B4787SA NDC:CB-1628GP OEM:8-94101-041-0 VAN:VPR92720A	C4141	4 Pairs		1.9262/ 1.9268 48.925/ 48.941	2.0466/ 2.0472 51.984/ 51.999	0.8710 22.12	0.0596 1.514
CS 329BB Balance shaft bearing. ACL:3C1190S CLE:SH-1190S DUR:CHG-14 FMO:1444M
MB 540AM STD/.25/.5/.75/1.0/1.25/1.5 ACL:5M2817 CLE:MS-1298AL DAI:M5014K FMO:5028M GLA:M5270SA NDC:MS-1103GP OEM:8-94215-641-0 VAN:VPM91677	M 540/1 M 540/2	3 Pairs 2 Pairs	1-3-5 2-4	2.2016/ 2.2022 55.921/ 55.936 2.2016/ 2.2022 55.921/ 55.936	2.3220/ 2.3228 58.979/ 58.999 2.3220/ 2.3228 58.979/ 58.999	1.2650 32.13 0.8310 21.11	0.0596 1.514 0.0596 1.514
TW 118AM STD ACL:1T3286/1T1824 CLE:TW- 451S DAI:T 500A FMO:3571BF GLA:W2188SA K.S:TW-1616A NDC:TW-1030GP OEM:8-94210-750-1 VAN:VPW95068	W 118	1 Pair		2.5098/ 2.5197 63.749/ 64.000	3.1575/ 3.1673 80.201/ 80.449	0.0000 0.00	0.0929 2.360